It seems that one of the hurdles folks have to installing a toothed planing stop in their workbench is fear of the teeth marring the plane iron. They worry that as the plane works the stock thinner and thinner all the sudden out of the blue, “BAM!”, your edge is toast. I’ve been using a toothed planing stop regularly for a few years now and never once had an incident like that. I’ve found that woodworking demands so much attention anyway that working the height of the stop into your consciousness is not a big deal. As long as you’re awake and paying attention, you will have no issues. This morning, I was barely awake and hardly able to pay...
During the lull I have during Mike hard at work editing our upcoming Foundations video and before wading deep into Issue Two (and working on my Fisher book), I finally found a moment to add some new products to our e-store. 10 Essential Furniture Repair DVDs First off, the ’10 Essential Furniture Repairs’ DVD produced by Popular Woodworking shows the most basic repairs I’ve employed to make a living restoring antique furniture. Although it’s not a shortcut approach, I did select some of the more straightforward (and less specialized) repairs to demonstrate. You can do this. From loose joints to severed tenons to white rings in an old finish and more, this DVD should bolster your confidence to make repairs...
Reading M&T is an opportunity to unplug from the screen time of modern life and to revel in the creative pulse and enduring craftsmanship of woodworkers. But books do have their weaknesses. I find that someone can tell me how to do something ten times and I still struggle but as soon as they show me in person, it clicks. The success of YouTube tells me I’m not alone here. I regularly talk with two different kinds of readers that express the same desire. There are the folks with little to no woodworking experience asking me how to get started. I also have long-time power tool users that are falling out of love with their dust collectors and router bits....
When I wrote the previous post titled “Thoughts on Real Craft”, I wasn’t anticipating such an active interaction with readers. (If you missed that last post, you might want to go back and read it to make sense of the clarifications here.) The post was written as a way to think out loud and get feedback. Boy, did I get feedback! I am grateful for such passionate and thoughtful readers who are willing to invest time into this discussion. Thank you for your comments! I appreciate your participation so much, in fact, that I am looking into upgrading the commenting system to a platform that is easier to use and read in the future. The conversations I’ve been having...
I’ve been interested that the term “Real Craft” has been thrown around a bit the last couple years in green woodworking circles. The hash tag is full of spoon carving, pole lathes, and the like. After doing some digging to try to figure out the origins of this phrase, I realized I should talk with Jarrod Stone Dahl. Jarrod is a spooncarver/bowlturner from the Wisconsin woods who has been using the term more than anyone else so I thought I’d pick his brain about it. Jarrod sent me to Robin Wood’s commentary on Chris Eckersly’s 2014 “Real Craft” exhibition. Reading Eckersley’s essay and Wood’s critique hit me in just the right spot as I’ve been thinking a lot lately...
The 2016 Lie-Nielsen Open House was the first show I’ve attended as a vendor. Consequently, the experience was entirely new and exciting and even a bit surreal for me. Joshua and I arrived early Friday so we could get our fairly elaborate display set up before the tent filled in with other demonstrators. We’d worked out the most efficient method of setup back at the studio, but here I found myself distracted by everyone else trickling in with their wares. Whoa, look at those planes! How much for that saw? I just spotted Peter Follansbee (the legend)! Tom Lie-Nielsen shook my hand. I may never wash it again. Focus, Mike. We have work to do. I don’t want to...
Mike and I had a wonderful weekend at Lie-Nielsen. He and I have had many conversations since about how much we appreciated the culture of creativity there. I am always blown away at how, even though it’s been a year since the last one, we can pick up right where we left off. These folks are down-to-earth awesome people. Tom’s business model is groundbreaking in its generosity to other vendors. Think about it: The guy invites all his competition (i.e. friends) to come and sell their goods without charging them a fee, he buys them dinner, and then genuinely thanks them for coming to the party. What a class act. In most markets you expect fierce competition, belittling other makers,...
For me, the beginning of the work week is always about picking up the pieces from the week before, returning phone calls, and planning the week’s work. Today has been another miscellany Monday with the main order of business being unpacking from the Lie-Nielsen Open House. We decided to leave the van loaded when we got back late Saturday night so when I opened the van door the first time this morning, the glorious aroma of pine was almost intoxicating. Between the two knockdown benches and “barn” backdrop there was a lot of pine in there. The smell of pine is one of the reasons I love working wood. I warned Mike that today would be very broken up with...
Mike and I did the final packing of the van today for the Lie-Nielsen Open House tomorrow and Saturday. Early tomorrow morning we’ll be heading down to Warren to setup in time for all the visitors. Last week, we worked pretty hard building an easily transportable but respectable display for shows. We wanted the look of a preindustrial cabinetmaker’s shop but relatively lightweight and easily assembled. After we built a 9’ knockdown Nicholson bench, we ripped 1.5” off the top of a partially rotten 8x8 hewn timber frame sill I had left over from my house project. With these “posts” screwed to the back apron, we could attach horizontal sash sawn wide pine boards for “sheathing”. Topped off with “braces”...
Even though I’ve done my best to convey what M&T is on the web, when people first hold a copy of Issue One in their hands they say, “Oh, wow. Now I get it. This is amazing!” The overall heft, the tactile quality of the paper, and the photography all seem to grab folks right out of the gate. In order to help convey that experience to those that haven’t seen a copy in person, I’ve put together this short video for a close-up look at Issue One. If you know someone who would be interested, please pass this video along. Thanks!!!
Music credit: Steuart Pincombe and Rebecca Landell Reed
