Blog — Issue Two RSS





‘Woodworking in Estonia’ Book Review: Issue Two Table of Contents

In every issue of M&T we want to review a book we think will benefit our readers. For Mike and I, this issue’s selection was a no-brainer. Woodworking in Estonia, recently republished by Lost Art Press, has got to be one of the most important books released on traditional woodworking in a long time. Antes Viires spent many years of his life documenting and studying the wood craft tradition of Estonian artisans and wrote a comprehensive book founded in scholarly rigor and aimed to inspire the next generation of craftspeople. Because Mike has been poring over this book since it came out he jumped at the opportunity to write a review. He has been particularly fascinated to see that understanding...

Continue reading



An Unjustified Mystique: Period Dovetails Up-Close… Issue Two Table of Contents

The modern obsession with perfectly-spaced, aerospace-tight, single-kerf-pin dovetails is rampant. Why is Instagram full of immaculately executed dovetails? Or, more importantly, why does today’s woodworker agonize over the few thou of an inch gap on these joints? It’s because they haven’t seen period dovetails. Although artisans of the past were exceptionally skilled, I would like to bust the myth that they obsessed over dovetails as much as we do. It is apparent from the work they left behind that the vast majority of pre-industrial artisans were more concerned with the strength of the joint than they were with impressing their “social following”. It is not uncommon to find noticeably irregular spacing of the tails, considerable variation in the angle of...

Continue reading



A Furniture Conservation Primer from Don Williams: Issue Two Table of Contents

Art conservation is one of those disciplines that can be shrouded in mystery. When famous paintings or buildings are restored, it gets published in the New York Times. The public oohs and ahhs at the magic of restoring a relic from hundreds or thousands of years ago back to its former glory. Conservation projects like these are exciting because it’s the closest thing we have to time travel. It’s the only place that the authentic past is revived in the present before our very eyes. As the senior furniture conservator of the Smithsonian Museum Conservation Institute, Don Williams has been routinely entrusted with restoring some of our nation’s most significant cultural artifacts. Considered by colleagues the “inimitable” Don Williams, he...

Continue reading



Chris Schwarz on Using the Low Roman Workbench: Issue Two Table of Contents

In my mind, one of the most interesting bits of woodworking research to crop up in the last few years has been Chris Schwarz’s journey into “Roman” workbenches. If you’ve been following along at his blog, you’ll remember he built two different variations. One of which is a based on a 16th century plate and is essentially the precursor to the modern workbench. It’s funky looking but pretty familiar in function to modern woodworkers. It’s the other bench that has grabbed my full attention because it is so different to the way we work today. This second workbench he built is based on illustration of ancient Roman workworkers. Besides the fact that it has 8 “staked” legs, it is so...

Continue reading



Walker on ‘Assessing the Eye of Blue-Collar Geometers’: Issue Two Table of Contents

George Walker has written a fascinating piece for Issue Two that we’re calling ‘Dividing the Line: Assessing the Eye of Blue-Collar Geometers’. In this essay, George presents his own design research from a new perspective. By comparing two 18th century cabinetmaking cousins’ apron profiles to each other, George is able to reverse engineer their designer’s eye for us. At first, you think their aprons look similar enough but after he walks you through the layout process, you see how different they really are.This fascinating exercise will help you in your workshop by teaching you how to layout your own aprons or profiles. How do you capture your inner designer’s eye? How do make something that reflects not just general attractiveness...

Continue reading



Examination of an 18th Century Drop Leaf Table: Issue Two Table of Contents

Every issue of M&T will have an in depth analysis of a particular period piece. In the last issue, we looked at a Federal Boston secretary. (Yes, the ebook is still in the works.) The objective with this kind of piece is to provide numerous up close and personal photographs of not only the pretty show surface, but also the guts of the thing. This is the stuff museums don’t typically publish for people and it’s exactly the kind of stuff that woodworkers want to see. For Issue Two, I chose this mid to late 1700s New England table that I purchased at an auction earlier this year. I selected this piece because it’s not rare or unique in at...

Continue reading



Interview with David and George Sawyer: Issue Two Table of Contents

Regularly in my interactions with colleagues I get leads and recommendations for stories. The one that stood out above all else to me was a recommendation from Peter Galbert that I do an interview with legendary chairmaker David Sawyer and his son George, who is now taking over the business. David has a reputation for being one of the most influential Windsor chairmakers in the early days of the modern Windsor revival. I leapt at the opportunity and arranged a visit with the Sawyers. I made that trip this spring, on a drive back from New York, and spent a few wonderful hours with this rural Vermont family. We talked craft, design, technology, rural life, homesteading, etc. It was a...

Continue reading



Announcing the Table of Contents: Reproducing a Yale Banister-Back Chair

Over the next couple weeks I will be releasing the table of contents for Issue Two here on the blog. Once a day, I will post about one of the articles that will be in Issue Two. The folks who saw the list at WIA universally agreed that Issue Two looks even more exciting than Issue One and so I am looking forward to sharing the list with you. Pre-orders will open November 1st here. We’re expecting a January delivery. I’ve talked about some of Issue Two’s content already so this first one should not be a surprise. As I’ve mentioned before, the Yale University Art Gallery commissioned a reproduction of an 18th century banister-back chair for their new exhibit...

Continue reading



Beginning the Transition to Issue Two

With WIA coming up this weekend, we’ve decided to begin discussing the contents of Issue Two publicly. The table of contents, which has been under wraps as of yet, is something I have been itching to announce for a while now. I will be making the T.O.C. public first at my WIA display and then, after I get back from the show, I’ll publish it here on the website. Drop by the M&T booth and be the first to see what is coming up in the next issue. In the spirit of transition to Issue Two, we’ve discounted the Issue One Cover posters half off. They are now $7 instead of $15. Also, the stickers have been knocked down a...

Continue reading



Respite

Late last week I finally got a two day break from this magazine craziness. Early Thursday morning my studio assistant Mike and I got on the road to head down to the Yale Furniture Study in New Haven, CT. Even though this was technically a “business” trip it was an immense “pleasure” to be away from my computer screen and M&T mailing responsibilities. This magazine has been a real stretch on my ability to keep it together while being pulled a million different directions by urgent matters. I survived a few months like that but I was beginning to reach a breaking point.This Yale trip was a totally different experience. Road tripping 6.5 hours down the coast with my good...

Continue reading