Upcoming in Issue Three: “Through a Wilderness of Ornament: Making Sense of 18th-Century Pattern Books” by Bill Pavlak This past February I began my presentation to a group of 250 period furniture making enthusiasts at Colonial Williamsburg with a simple question: how many of you own a copy of Thomas Chippendale’s The Gentleman and Cabinetmaker’s Director? Not surprisingly, most raised their hands. When I followed that with “how many of you actually refer to this book regularly,” I got a very different response – perhaps fewer than ten raised hands. This is exactly what I expected. Why? Because at first blush Chippendale’s plates, like those in other 18th century pattern books, only bear a slight resemblance to the Colonial American...
Upcoming in Issue Three… Book Review by Vic Tesolin: “A Field Guide to Identifying Woods in American Antiques & Collectibles” by R. Bruce Hoadley I’m a voracious reader of both fiction and non-fiction and as you can imagine, most of my non-fiction reading is about woodworking. Currently you’ll find me in the Japanese hand plane rabbit hole and I’m not sure if I can find my way back out. Joshua asked me if I could write a review of R. Bruce Hoadley’s latest book A Field Guide to Identifying Woods in American Antiques and Collectibles when he and I were at the Fine Woodworking Live event this year. Writing this review was an absolute pleasure for me because I have...
Upcoming in Issue Three: “Making a Stand: Form and Function for $1.50” by Michael Updegraff Most woodworkers today admire the form of the period candlestand. From the graceful, sinuous legs to the seemingly intricate sliding dovetails that secure them, from the details of the turned standard to the beautiful grain exhibited in a tilting top, these pieces sometimes seem to be more sculpture than household mainstay. But this type was possibly the most common piece of furniture around in the 18th or 19th century, and was often present in every room of the house. Consequently, makers of the day built these stands not only in great quantity, but fast. After all, a single candlestand typically fetched from $.50 to...
Editor’s Note: I am currently on my return trip home from visiting with Garrett Hack and his wife, Carolyn, on their idyllic Vermont farm. Garrett and I spent time in his shop doing the photography for his article in our upcoming Issue Three. I’ve asked Garrett to provide a summary for readers here at the blog. The following is his write-up… “There is no mystery why woodworkers (and many other trades) relied on patterns. They are a simple and accurate way to transfer shapes easily and repeatedly. A shapely case apron, curved chair leg, or the serpentine profile of a tabletop are all typical patterns an 18th century maker would have had on hand and used to speed his work along, just...
Upcoming in Issue Three: "The Best of Both Worlds: Embracing Art in Craft" by Danielle Rose Byrd ... Why do we gravitate towards seeing things in black and white, right or wrong, this or that? In this article, Danielle explores the tendency of such a dynamic in the world of woodworking, a world where art is frequently thought of as less-than; a recurrent villain to the hero of craft. Why does the word “art” incite such pushback and how can we inhabit more of the gray areas that exist, in both our own work and the appreciation of others’? Speaking from her perspective and using the work of furniture makers who inspire her as an example, she describes the...
"Essential Human Work: Reimagining a Legendary School on the Coast of Maine" by: James McConnell and Michael Updegraff featured in Issue Three. After nearly 40 years of teaching traditional hand skills, chairmaking, and green woodworking, Country Workshops is closing its doors. Started deep in the mountains of North Carolina in 1978 by Drew and Louise Langsner, the school has become an iconic epicenter of handcraft, and countless creative journeys have begun by venturing down the narrow gravel driveway. This is not a lament or eulogy to the passing of an era, however. Kenneth Kortemeier and his wife Angela share the passion of the Langsners to teach these skills of "essential human work". Kenneth learned primitive skills from a Cherokee elder...
Editor’s Note: This post is written by Shelley Cathcart, Assistant Curator at Old Sturbridge Village. Shelley and her co-author, Amy Griffin (American Foundation Curatorial Fellow), have been researching the cabinet and chair making of two New England craftsmen. We are excited to publish this fresh research in M&T Issue Three, titled "On the Trail of Two Cabinetmakers: Reconstructing the Careers of Samuel Wing and Tilly Mead". We are confident this essay will help to advance our understanding of rural American cabinetmaking before the Industrial Revolution. Interior of Samuel Wing’s Workshop, Sandwich, Massachusetts. November 1964 A new exhibition at Old Sturbridge Village, Planed, Grained, & Dovetailed: Cabinetmaking in Rural New England, explores the tools, products and livelihoods of rural cabinetmakers in...
Today, we begin releasing the table of contents for Issue Three. Each day we will describe one article from the upcoming issue to give you all taste of what’s to come. On Friday at Lie-Nielsen, we released the list of articles and heard lots of excited feedback about this upcoming issue. Mike and I keep pinching ourselves as we continue to get such talented and passionate authors. Stay tuned here at the blog as we announce each of the 12 articles that will be in Issue Three. Without further ado… here is the first article: “The Spring Pole Lathe: Design, Construction, and Use” by: Joshua Klein Of all the work that I’ve demonstrated over the years there’s one...
Today, Mike and I are packing up for Lie-Nielsen’s Open House. This is always a highlight in our year because Tom throws such an awesome party. He is incredibly generous to us and we get to catch up with so many great friends we only get to see a few times a year. If you haven’t had a chance to try one of the tools you’ve been eyeing up from one of your favorite toolmakers, this is a great opportunity to do so. The list of vendors is huge - it seems like it gets bigger every year. If you are going to be there, make sure to drop by our booth. We’ll have magazines, DVDS, t-shirts, posters, stickers,...
